CoinOpSpace.com - Classic Arcade Game Forum
Classic Arcade, Pinball and Console Collecting Gaming Community
Mappy/Jr Pac reproduction top boxes - Run?
Mappy Repro Marquee boxes
Hi All,
Looks like i'm going to be doing at least a couple of these for some folks so I figured as long as I'm cutting them on the CNC i'd see if there was interest for any more than two. Don't have solid pricing yet, but probably in the 40-45 range for a flat packed 'kit' that you can screw or nail together to save shipping costs OR I can preassemble if you want to pay shipping on the assembled top. All parts are CNC cut, will be the appropriate vinyl color on both sides basically ready to assemble.
Here's a few shots of the prototype cut from MDF:
This prototype doesn't have the tmolding channel routed yet and the slots for the light fixtures aren't in final position.. just wanting to get feedback on whether to make a handful of them or not!
/b
Hi All,
Looks like i'm going to be doing at least a couple of these for some folks so I figured as long as I'm cutting them on the CNC i'd see if there was interest for any more than two. Don't have solid pricing yet, but probably in the 40-45 range for a flat packed 'kit' that you can screw or nail together to save shipping costs OR I can preassemble if you want to pay shipping on the assembled top. All parts are CNC cut, will be the appropriate vinyl color on both sides basically ready to assemble.
Here's a few shots of the prototype cut from MDF:
This prototype doesn't have the tmolding channel routed yet and the slots for the light fixtures aren't in final position.. just wanting to get feedback on whether to make a handful of them or not!
/b
Comment
-
Comment by Brian Jones on October 31, 2009 at 10:36am - i have many of the parts for these done, but a big 'real' job popped up that's hogging the cnc's time for now.. Only one last part to actually cnc, the rest are cut and waiting for detailing.
-
Comment by Jeff Rothe on October 16, 2009 at 8:43am - I know you've ordered the wood now, but I may end up wanting 2 if you have another one left over...
-
Comment by Richard RikiTiki on October 2, 2009 at 10:41am -
Cant wait to get this thanks again B for doing these
will make my Mappy very Happy.
-
Comment by Roadrunner000 on September 30, 2009 at 9:03pm - Brian...put me down for two..I have two spare nice marquees to put in those....
-
Comment by Jeff Rothe on September 30, 2009 at 3:33pm
- Awesome awesome...looking forward to it. Hope you get like 5 more people at least, those things do get a good deal of swelling, could at least use to be replaced if they weren't cut...
-
Comment by Spriggy on September 29, 2009 at 6:18am - Is that some tongue and groove I can see. Very cool CNC stuff.
About
© 2010 Created by Jeff Rothe.
Powered by 
.
You need to be a member of CoinOpSpace.com - Classic Arcade Game Forum to add comments!
Join CoinOpSpace.com - Classic Arcade Game Forum