Red Baron Sideart

Replies to This Discussion

Permalink Reply by Jeffrey Matthews on December 20, 2008 at 5:09pm

Jeff;
I'm glad you received it.
I do believe you are correct, use which side you think is beast and you could just flip the image to use for the other side.
No stress on the time lines as I have no idea when I'll be able to clean it up for the next step.
It will be a vector file when scanned?
Thanks
Jeff

Permalink Reply by Jeff Rothe on December 22, 2008 at 5:17pm

No, the scan is just a scan of the Red Baron sideart. Someone would have to vector trace the artwork. But, the nice thing is that the artwork is really simplistic in the big scheme of things.

I took some time to scan one side today...and kind of rough the scans together. It isn't ready to trace, all of the fine tuning will have to be done....but the scanning should be done.

I am not planning on vectorizing this. Are you thinking you are going to investigate if there is any leftover interest to get this reproduced after Archer made his sideart prints?

Permalink Reply by Zorg on December 31, 2008 at 5:26pm

this one will be an easy art to trace.

if you eed some help lmk

Permalink Reply by Jeff Rothe on January 12, 2009 at 11:56pm

Jeff P. has this artwork now....so...he said he will pick at it as he has time for free...nice of him to offer to do that.

He's got the base scans and the quickie stitch, if he can even use that.

Permalink Reply by Jeffrey Matthews on March 27, 2009 at 2:19am

I guess time really flies when you are having fun!

Now that I have 3 Children running around the house, (well actually 2 "running" as of now), I haven't been around as much as I would like to be, (forums etc.). In fact, I have played a total of 6 games of I,Robot back to back one night, in the entire last 2 weeks! All the games I ever wanted and absolutely no time to play them, ironic - ain't it??

Thanks for running with this project Jeff. I am going to start to get a group of interested collectors together in the coming months and see what the numbers will be to reproduce this art set. Any idea on where the project stands?

Thanks
Jeff

Permalink Reply by Tester007 on May 16, 2009 at 7:29pm

Is this going ahead by anybody? Starting to look around at options and may wait if its beeing done.. looks like it would be an easy repro..

Permalink Reply by Jeff Rothe on May 16, 2009 at 7:45pm

Either of you will want to get in touch with Jeff Phillips and see if he has done anything with the scans I sent him...

Permalink Reply by Jeff Rothe on October 9, 2009 at 9:52pm

As a long overdue update to this....

I think Jeff P. had a hard drive failure and lost what I sent him. I still have the scans.

Jeff had me send the artwork back to him a couple of months ago. He was going to have a print shop vector it and print it I believe...at least that was the idea.

Permalink Reply by Jeffrey Matthews on October 9, 2009 at 10:03pm

Jeff;
I finally figured out my password - I had 2 computer failures since 9/11, my trusty Xtreme and then the replacement HP dv7 - never buy a HP, tech support is non-existent....I'm using my Dell Inspiron 1100 - it's like 10 years old and still kicking, I'm glad I never got rid of it!
Anyway, life has caught up with me, today is my youngest birthday, 1 year old!
I just did not get the chance to get to the scanner yet. I will do this eventually, I just cannot promise when.
Hopefully by years end.
Jeff


Jeff Rothe said:

As a long overdue update to this....

I think Jeff P. had a hard drive failure and lost what I sent him. I still have the scans.

Jeff had me send the artwork back to him a couple of months ago. He was going to have a print shop vector it and print it I believe...at least that was the idea.

Permalink Reply by Jeff Rothe on October 9, 2009 at 10:04pm

Why do you need to do any scanning?....I have the scans done...and I thought that the print shop was going to do all that anyway?

Permalink Reply by Jeffrey Matthews on October 10, 2009 at 7:30am

I am going to bring them to the print shop for scanning as they have the large format scanner and maybe, if the price is right, I'll get a set printed up. Otherwise, I'll have the scan and start the vectorization - eventually.

Jeff Rothe said:

Why do you need to do any scanning?....I have the scans done...and I thought that the print shop was going to do all that anyway?

Permalink Reply by Patrick Danis on May 31, 2011 at 12:57pm

So where did we end up on this project?  I recently acquired 2 RB uprights which both need art replacement.  I'm sure there are several others out there that would like to see this come to fruition.

• ‹ Previous
• 1
• 2
• Next ›
• Page