CoinOpSpace.com - Classic Arcade Game Forum
Classic Arcade, Pinball and Console Collecting Gaming Community
Dig Dug Cabret Cpos in Production
I'll be posting the progress of the Dig Dug Cabret cpos here, which Ill be updating daily.
Having finished up the Color Matching it was time to put these into production and the size makes these ideal at only aprox. 16x18" I have plenty of these screens on hand to get these screened fairly quick
So lets get digin....
The Films in order as they will go to screens and print
Black
The first Screen Black Set Up and ready for print
Having finished up the Color Matching it was time to put these into production and the size makes these ideal at only aprox. 16x18" I have plenty of these screens on hand to get these screened fairly quick
So lets get digin....
The Films in order as they will go to screens and print
Black
The first Screen Black Set Up and ready for print
Replies to This Discussion
-
Permalink Reply by Richard RikiTiki on -
-
Permalink Reply by Richard RikiTiki on
-
2nd day 2nd color
-
Permalink Reply by Richard RikiTiki on
-
Another Day, Another Color
In For a Closer look, lots of very small detail, some of which was probably even lost in the orginal print
and was noticed in Jeffs orginal blog post
-
Permalink Reply by Richard RikiTiki on
-
On Todays Scedule-Dark Blue/Purple
-
Permalink Reply by Richard RikiTiki on
-
-
Permalink Reply by Jeff Rothe on -
I always love to see the artwork I have worked on coming together...especially this mass shot from the drying racks...
-
Permalink Reply by Jim Crismale on -
Gotta say... It's looking good from here!
-
Permalink Reply by Richard RikiTiki on
-
Making some last minette art revisions...
after screening the Dk Blue/Purple I had a feeling it wouldnt be opaque enough to hide the next color
So heres the orginal Pink Layer
Which might have resulted in something like this
Solution, The Pink will be screened over the entire aera of blue
Simlar problems like this using Blue as a base color on Pengo Art rather than a standard black to hide all trapped colors resulted in color bleeds that could be seen through the front
-
Permalink Reply by Richard RikiTiki on
-
The new Hot Pink Screen is ready and setup for print
-
Permalink Reply by Richard RikiTiki on
-
So the pink screened...
and the problem solved..
-
Permalink Reply by Richard RikiTiki on
-
Diggin Deeper...
Purrrdy
-
Permalink Reply by Richard RikiTiki on
-
Last color full coverage-White
Can you DIG IT!
Ill be letting these fully dry over the weekend before laminating the back with the 3m adhesive
then triming them down to size
About
© 2010 Created by Jeff Rothe.
Powered by 
.
