My small arcade / pinball parts haul tonight

Replies to This Discussion

Permalink Reply by Shane on July 1, 2009 at 11:32pm

They look like there in good condition too.

▶ Reply to This

Permalink Reply by Bill Jr. on July 1, 2009 at 11:52pm

Nice haul. I spy a few DK or DK Jr. PCB's? I think I spy a NOS DK harness.

You picking up any games from this op?

▶ Reply to This

Permalink Reply by Paul Olson on July 2, 2009 at 12:20am

Please let me know if you have anything for Tempest or Spy Hunter.

▶ Reply to This

Permalink Reply by Jeff Rothe on July 2, 2009 at 8:55am

As far as I know, no stuff for Tempest or Spy Hunter, if there is, it would be random parts that I wouldn't know right off the top...

No full games, only a handful of PCBs.

▶ Reply to This

Permalink Reply by gatordad on July 2, 2009 at 12:03pm

Hi Jeff, Let me know what you might like for the DK JR CP
zip is 60451

▶ Reply to This

Permalink Reply by josh hamman on July 2, 2009 at 1:04pm

Dang! beat me to the DKJ panel... :(

▶ Reply to This

Permalink Reply by Jeff Rothe on July 2, 2009 at 1:08pm

There is all that DK3 stuff too...but no love for Donkey Kong 3. I want to say there are other parts in there for DK Jr., but I don't think that came back with me in load 1.

▶ Reply to This

Permalink Reply by Bill Jr. on July 2, 2009 at 1:15pm

DK3 has some following. I'm sure if you get it all together someone will want the "kit" if it's all there. I'm 1/2 tempted to ask you about a DK PCB seeing mine is having some issues (haven't troubleshooted yet and believe it's one of the adjustment pots) and a DK3 Wiring harness for my D2K seeing it uses a nice "EDGE" connector. Must resist. ;)

▶ Reply to This

Permalink Reply by Jeff Rothe on July 3, 2009 at 9:20am

Was poking through more of the boxes last night and found this little item....might be nice to have around.

▶ Reply to This

Permalink Reply by Jeff Rothe on July 5, 2009 at 11:54pm

Was looking more through the items tonight and found some other things of interest.

First, a box of leafs...

And also some parts in a box labeled Zaccaria parts - obviously pinball parts...

I also pulled out the Monroe Joystick. This thing is spotless...

▶ Reply to This

Permalink Reply by Paul Olson on July 6, 2009 at 12:22am

Is that a second Monroe stick?

▶ Reply to This

Permalink Reply by Jeff Rothe on July 15, 2009 at 6:22pm

Only one Monroe stick, different photo.

Got the second half, and what I thought should have been everything. I think I am missing one small lot of manuals, that I may never get...we'll see.

I had taken separate photos of, but I am pretty sure that this one box is an NOS Donkey Kong 3 conversion kit.

Here is a photo of the couple of boxes I brought home today.

▶ Reply to This

▶ Reply to This

• ‹ Previous
• 1
• 2
• 3
• Next ›
• Page