CoinOpSpace.com - Classic Arcade Game Forum
Classic Arcade, Pinball and Console Collecting Gaming Community
Looking for a red reject button
As you can see I'm missing a red reject button on a Golden Tee 2K I'm building. 1.25" tall, 1"wide. If you have one let me know. If you have two of another color I'll do that too. The game is set to free play so they don't need to be operational. It's more for "the look." Nothing more annoying than missing parts on a game. PS: Yes I just ordered a lock and key. Thanks for your time. -Tim
Replies to This Discussion
-
Permalink Reply by Jeff Rothe on -
I have some, but they don't match those measurements. They might be close to the 1", but they're closer to 1.5", a couple at 1.375".
-
Permalink Reply by Tim Mayhew on -
Well if it comes to it I'm going to weld a small black plate over the hole. Problem solved. What a crazy piece to try and track down...
Jeff Rothe said:I have some, but they don't match those measurements. They might be close to the 1", but they're closer to 1.5", a couple at 1.375".
-
Permalink Reply by Wayne Boyd on -
I would check into who made the coin door...pretty sure that a new or NOS replacemant can be had for very minimal cost - it looks fairly common.
About
© 2010 Created by Jeff Rothe.
Powered by 
.
